Fig. 60: Database Performance Test - Menu
Select one or several connections in the data base view, which should be tested, and select from the context menu.
Fig. 60: Database Performance Test - Menu
In the following dialogue (s. fig. 61 ) the settings for the performance test can be made.
Fig. 61: Database Performance Test - Settings
The following settings are available:
| Testproperties | |||
|---|---|---|---|
| Finished datarecords | Number of data records, which are written into the test table | ||
| Scale distance | Determines the distance of the measure. E.g. a value of 1000 will alwais create a measure point after 1000 data records or ms depending on the choosen test type | ||
| Test type | As test type the write test or the write/read test can be selected | ||
| View properties | |||
| View | |||
| Splinecurve: | A spline curve is a curve that passes by a given number of points, and connects them smoothly | ||
| Pointline: | The measure points are connected directly | ||
| Splinekurve & Punktlinie: | Spline curve and point line are shown together | ||
| Execution | |||
| t/ms per data record: | Measures the used time for the data recordes given at Scale distance in ms | ||
| Data records per time | Measures the written data records for the time given at Scale distance | ||
| Multi selection | |||
| Note: The following points are only selectable, when at least two databases are choosen for the test | |||
| Processing | |||
| Parallel: | The write/read test is executed at the same time for the selected data bases | ||
| Successively: | The write/read test is successively executed for the selected data bases | ||
Database Performance Test